Winnebago 2004 Meridian Itasca Owner's Manual download pdf (Page 88)

SECTION 7

PLUMBING SYSTEMS

7-4

3. Turn water tank fill valve to CITY FILL

position.

4. Turn on the external water source.

When connected to an outside source of

water, the water bypasses the demand pump and

storage tank and supplies pressure directly to

individual faucets and toilet. A check valve built

into the pump prevents water from entering the

pump and filling the storage tank.

To disconnect from the external source:

1. Turn the external source off.

2. Open a faucet inside the vehicle to relieve

line pressure.

3. Disconnect the hose from the vehicle and

replace the cap on the connection.

WATER PURIFIER

(FILTER) SYSTEM

The water purifier system uses a flow-

through activated carbon filter that removes

chlorine and other impurities, resulting in clean,

taste-free and odorless drinking water.

Replacing the water filter cartridge:

Replace the filter cartridge when water flow from

the purifier faucet is too slow for convenience.

· Place a container beneath the filter to catch

any remaining water during removal.

· Raise the valve handle near the top of the

filter base to block water flow to filter.

· Twist the filter cartridge counterclockwise

about a quarter-turn and pull it down and out

of the filter head.

City Water

Connector

Water Filter Assembly -

Below Galley Sink

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 147 148

No comments

Winnebago 2004 Meridian Itasca Owner's Manual Page 88